STARTER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FLYWHEEL HOUSING SIDE COVER


    1. A005LE9E01
      Text in Illustration
      *a Claw

      Disengage the claw by pulling it outward and remove the flywheel housing side cover.

  4. REMOVE STARTER ASSEMBLY

    A005LG1E02
    Text in Illustration
    *1 Terminal 30

    1. Open the terminal cap.

    2. Remove the nut and disconnect the terminal 30.

    3. Disconnect the connector.

    4. Remove the 2 bolts and the starter assembly.