IGNITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE STEERING COLUMN ASSEMBLY (for RHD)

    Click here

  2. REMOVE STEERING COLUMN ASSEMBLY (for LHD)

    Click here

  3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY

    A005MDOE01

    Note


    • Perform the operation after situating the upper steering column bracket assembly in such a way that the ignition or starter switch assembly faces upward, as shown in the illustration.

    • Do not turn the upper steering column bracket assembly sideways or downward because doing so might release the upper steering column bracket assembly's component parts.

    Text in Illustration
    *1 Ignition or Starter Switch Assembly

    1. A005L5L

      Disconnect the connector.

    2. Disengage the 2 claws and remove the ignition or starter switch assembly.