IGNITION SWITCH INSTALLATION

PROCEDURE


  1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY

    A005MDOE01
    Text in Illustration
    *1 Ignition or Starter Switch Assembly

    Note


    • Perform the operation after situating the upper steering column bracket assembly in such a way that the ignition or starter switch assembly faces upward, as shown in the illustration.

    • Do not turn the upper steering column bracket assembly sideways or downward because doing so might release the upper steering column bracket assembly's component parts.


    1. Engage the 2 claws and install the ignition or starter switch assembly.

    2. Connect the connector.

  2. INSTALL STEERING COLUMN ASSEMBLY

    Click here