GLOW PLUG INSTALLATION

PROCEDURE


  1. INSTALL GLOW PLUG ASSEMBLY


    1. Clean the glow plug installation holes in the cylinder head.

    2. Using a deep socket wrench 10 mm, install the 4 glow plugs.

      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

  2. INSTALL NO. 1 GLOW PLUG CONNECTOR

    A01VEWC

    1. Install No. 1 glow plug connector with the 4 nuts.

      Torque:
      2.2 N*m  { 22 kgf*cm, 19 in.*lbf }

    2. Connect the glow terminal with the nut.

      Torque:
      3.8 N*m  { 39 kgf*cm, 34 in.*lbf }

      Note

      Install the glow terminal in the correct direction.

    3. Install the 5 screw grommets.

      Tech Tips

      Push the screw grommet into the threaded portion of the glow plug by hand, and then turn it clockwise.

  3. INSTALL NO. 3 ENGINE COVER BRACKET


    1. Install the No. 3 engine cover bracket with the bolt.

      Torque:
      8.4 N*m  { 85 kgf*cm, 74 in.*lbf }

  4. INSTALL NO. 1 ENGINE COVER

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }