IGNITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE STEERING COLUMN ASSEMBLY

    Click here

  2. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY

    A005MDOE01

    Note


    • Perform the operation after situating the upper steering column bracket assembly in such a way that the ignition or starter switch assembly faces upward, as shown in the illustration.

    • Do not turn the upper steering column bracket assembly sideways or downward because doing so might release the upper steering column bracket assembly's component parts.

    Text in Illustration
    *1 Ignition or Starter Switch Assembly

    1. A005L5L

      Disconnect the connector.

    2. Disengage the 2 claws and remove the ignition or starter switch assembly.