STARTER(for 2.0 kW Type) INSTALLATION

PROCEDURE

1. INSTALL STARTER ASSEMBLY

   
   

   1. Install the starter assembly with the 2 bolts.

      Torque:

      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

   2. Connect terminal 30 with the nut.

      Torque:

      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

   3. Connect the connector and engage the harness clamp.

   4. Close the terminal cap.

2. INSTALL NO. 2 AIR TUBE ASSEMBLY

   Click here

3. INSTALL CENTER ENGINE UNDER COVER

   Click here

4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

5. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   Click here

6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   5.4 N*m  { 55 kgf*cm, 48 in.*lbf }