WATER PUMP INSTALLATION

PROCEDURE

1. INSTALL WATER PUMP ASSEMBLY

   
   

   1. Install the water pump assembly through a new water pump gasket with the 3 bolts and 2 nuts.

      Torque:

      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

2. INSTALL WATER PUMP PULLEY

   
   

   1. Provisionally install the water pump pulley with the 3 bolts.

   2. Using SST, hold the water pump pulley.

      SST

      09960-10010   ( 09962-01000, 09963-00700 )

   3. Tighten the 3 bolts to the specified torque.

      Torque:

      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

3. INSTALL ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH

   Click here

4. INSTALL GENERATOR ASSEMBLY

   Click here

5. INSTALL FAN AND GENERATOR V BELT

   Click here

6. ADJUST FAN AND GENERATOR V BELT

   Click here

7. INSPECT FAN AND GENERATOR V BELT

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

9. ADD COOLANT

   Click here

10. INSPECT FOR COOLANT LEAK

    Click here

11. INSTALL ENGINE UNDER COVER RH

    
    

    1. Install the engine under cover RH with the 3 screws and 2 bolts.

       Torque:

       5.0 N*m  { 51 kgf*cm, 44 in.*lbf }