EXHAUST MANIFOLD INSTALLATION

PROCEDURE


  1. INSTALL EXHAUST MANIFOLD


    1. Install a new exhaust manifold to head gasket.

    2. A005JH1E01

      Install the exhaust manifold with the 3 bolts and 4 nuts as shown in the illustration.

      Torque:
      27 N*m  { 275 kgf*cm, 20 ft.*lbf }

  2. INSTALL MANIFOLD SUPPORT BRACKET


    1. Install the manifold support bracket with the 3 bolts.

      Torque:
      44 N*m  { 449 kgf*cm, 33 ft.*lbf }

  3. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. Install the No. 1 exhaust manifold heat insulator with the 4 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  4. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here

  5. INSTALL AIR FUEL RATIO SENSOR

    Click here

  6. INSTALL OUTER COWL TOP PANEL

    Click here

  7. INSTALL INNER COWL TOP TO COWL BRACE

    Click here

  8. INSTALL FRONT AIR SHUTTER SEAL RH

    Click here

  9. INSTALL FRONT NO. 1 VENTILATOR SEAL

    Click here

  10. INSTALL INNER LOWER COWL TOP REINFORCEMENT

    Click here

  11. INSTALL COWL TOP INSIDE CORNER PANEL RH

    Click here

  12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEBMLY

    Click here

  13. INSTALL FRONT CONSOLE BOX

    Click here

  14. INSPECT FOR EXHAUST GAS LEAK