EXHAUST PIPE REMOVAL

PROCEDURE


  1. REMOVE OXYGEN SENSOR

    Click here

  2. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A005JF7

      Remove the 2 bolts.

    2. Remove the exhaust pipe supports and the tail exhaust pipe assembly.

    3. Remove the gasket from the front exhaust pipe assembly.

  3. REMOVE FRONT FLOOR CENTER BRACE

    A005LC9

    Remove the 2 bolts and the front floor center brace.

  4. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. Disconnect the heated oxygen sensor connector and clamp.

    2. A005JSM

      Remove the 2 bolts and 2 compression springs.

    3. Remove the 3 exhaust pipe supports and the front exhaust pipe assembly.

    4. Remove the gasket from the exhaust manifold converter sub-assembly.