INTAKE MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY

    Click here

  2. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

    Click here

  3. REMOVE EGR PIPE CONNECTOR


    1. A005IAK

      Remove the 2 nuts and 2 bolts and remove the EGR pipe connector.

    2. Remove the 2 gaskets.

  4. DISCONNECT UNION TO CHECK VALVE HOSE

    Click here

  5. REMOVE INTAKE MANIFOLD


    1. A005M7Q

      Disconnect the No. 1 fuel vapor feed hose and No. 2 ventilation hose from the intake manifold.

    2. A005KQL

      Use the following procedure to disconnect the wire harness.


      1. Disconnect the connector of the manifold absolute pressure sensor.

      2. Disengage the 2 clamps and disconnect the wire harness from the intake manifold.

    3. A005JLI

      Remove the 3 bolts and 2 nuts and remove the intake manifold from the cylinder head.

  6. REMOVE NO. 1 INTAKE MANIFOLD TO HEAD GASKET


    1. A005MA9

      Remove the No. 1 intake manifold to head gasket from the intake manifold.