VACUUM SENSOR INSTALLATION

PROCEDURE

1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

   
   

   1. Install the manifold absolute pressure sensor with the bolt.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   2. Connect the booster vacuum tube to the vacuum sensor bracket.

   3. Install the vacuum sensor bracket with the manifold absolute pressure sensor with the nut.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   4. Connect the vacuum hose.

   5. Connect the connector.

   6. Connect the 2 wire harness clamps.

   7. Connect the No. 1 ventilation hose and No. 2 ventilation hose.