VACUUM SENSOR REMOVAL

PROCEDURE


  1. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A005HDX

      Disconnect the No. 1 ventilation hose and No. 2 ventilation hose.

    2. A005H27

      Disconnect the 2 wire harness clamps.

    3. A005MBQ

      Disconnect the connector.

    4. Disconnect the vacuum hose.

    5. A005IE3

      Remove the nut and manifold absolute pressure sensor with vacuum sensor bracket.

    6. Disconnect the booster vacuum tube from the vacuum sensor bracket.

    7. A005LO7

      Remove the bolt and manifold absolute pressure sensor from the vacuum sensor bracket.