EGR VALVE INSTALLATION

PROCEDURE


  1. INSTALL ELECTRIC EGR CONTROL VALVE ASSEMBLY


    1. A005MHZE08
      Text in Illustration
      *1 EGR Control Valve
      *a View A
      *b Upper

      Install a new gasket.

    2. Apply adhesive to the 2 or 3 end threads of the 2 bolts.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.

    3. Install the electric EGR control valve assembly with the 2 bolts.

      Torque:
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }

    4. Connect the No. 3 water by-pass hose.

    5. Connect the No. 4 water by-pass hose.

  2. INSTALL EGR WITH COOLER PIPE ASSEMBLY

    Click here

  3. INSPECT FOR EXHAUST GAS LEAK

  4. INITIALIZATION


    1. When replacing the electric EGR control valve assembly, perform initialization Click here.