FUEL PUMP ECU INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP CONTROL ECU BRACKET

   
   

   1. Install the 2 fuel pump control ECU brackets with the 4 screws .

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

2. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY

   
   

   1. Install the fuel pump control ECU with the 2 bolts.

      Torque:

      13 N*m  { 128 kgf*cm, 9 ft.*lbf }

      Note

      Replace the fuel pump control ECU if it receives an impact.

   2. Connect the fuel pump control ECU connector.

3. INSTALL COOLING FAN RESISTOR

   
   

   1. Install the cooling fan resistor with the 2 bolts.

      Torque:

      13 N*m  { 128 kgf*cm, 9 ft.*lbf }

   2. Connect the cooling fan resistor connector.

4. INSTALL FRONT BUMPER COVER

   Click here