FUEL PRESSURE REGULATOR INSTALLATION

PROCEDURE

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

   
   

   1. Apply gasoline to a new O-ring, and then install it to the fuel pressure regulator.

   2. 

      Install the fuel pressure regulator.

2. INSTALL NO. 2 FUEL SUCTION SUPPORT

   
   

   1. After aligning the positions of the claws, attach the 3 claws and clamp to install the No. 2 fuel suction support.

3. INSTALL NO. 1 FUEL SUCTION SUPPORT

   
   

   1. Install a new O-ring to the No. 1 fuel suction support.

      Note

      Make sure that the O-ring is properly seated.

   2. 

      Attach the claws in the order shown in the illustration to install the No. 1 fuel suction support.

      Note

      Make sure that the claws are securely attached.

4. INSTALL FUEL PUMP

   Click here

5. INSTALL FUEL PUMP HARNESS

   Click here

6. INSTALL FUEL SENDER GAGE ASSEMBLY

   Click here

7. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE

   Click here