EGR BYPASS VALVE SWITCHING VALVE INSTALLATION

PROCEDURE

1. INSTALL VACUUM SWITCHING VALVE BRACKET

   
   

   1. Install the vacuum switching valve bracket with the screw.

      Torque:

      1.4 N*m  { 15 kgf*cm, 13 in.*lbf }

2. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

   
   

   1. Install the No. 1 vacuum switching valve assembly with the bolt.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

   2. Connect the 2 vacuum transmitting hoses.

3. INSTALL NO. 1 ENGINE COVER

   Click here