FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A005I30E02
      Text in Illustration
      *a F (Upper End)
      *b E (Lower End)

      Check the fuel sender gauge resistance.


      1. Check that the float moves smoothly between the F level (upper end) and E level (lower end).

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 F (Upper End) 12.0 to 18.0 Ω
        E (Lower End) 405.0 to 415.0 Ω

        If the result is not as specified, replace the fuel sender gauge assembly.