REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY

    (See page MULTIDRIVE / CVT (K310) > CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY > REMOVAL)

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A005JSAE01

      Using SST, hold the crankshaft.

      SST
      09960-10010   ( 09962-01000, 09963-01000 )
    2. A005HCN

      Remove the 6 bolts, front drive plate spacer , drive plate and ring gear sub-assembly and rear drive plate spacer.

  3. REMOVE REAR ENGINE OIL SEAL


    1. A005K1QE03
      Text in Illustration
      *1 Protective Tape
      *a Cut Position

      Using a knife, cut off the oil seal lip.

    2. Using a screwdriver with its tip wrapped with protective tape, pry out the rear engine oil seal.