FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new oil pump seal.

      Note

      Keep the lip free of foreign matter.

    2. A005JG2E05

      Using SST and a hammer, tap in the timing chain cover oil seal until its surface is flush with the timing chain cover edge.

      SST
      09223-22010

      Note


      • Do not tap the oil seal at an angle.

      • Wipe off extra grease from the crankshaft.

      Tech Tips

      Oil seal tap in depth:

      0 to 1.0 mm (0 to -0.04 in.)

  2. INSTALL CRANKSHAFT DAMPER SUB-ASSEMBLY

    Click here

  3. INSTALL ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH

    Click here

  4. INSTALL FAN AND GENERATOR V BELT

    Click here

  5. ADJUST FAN AND GENERATOR V BELT

    Click here

  6. INSPECT FAN AND GENERATOR V BELT

    Click here

  7. INSPECT FOR ENGINE OIL LEAK

  8. INSTALL ENGINE UNDER COVER RH

    Click here

  9. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }