DRIVE BELT INSTALLATION

PROCEDURE


  1. INSTALL FAN AND GENERATOR V BELT


    1. Provisionally install the fan and generator V belt onto each pulley.

      Note


      • Make sure that there is no foreign matter or liquid, such as oil, on the belt and pulleys.

      • Make sure that the fan and generator V belt is securely fitted into the rib grooves of the pulley.

  2. ADJUST FAN AND GENERATOR V BELT


    1. A005HGN

      Insert an adjusting bar between the engine mounting bracket and generator assembly. Pull the adjusting bar toward the vehicle front to adjust the generator V belt tension.

      Note

      Do not insert the adjusting bar between the camshaft timing oil control valve assembly and generator assembly. It could damage the camshaft timing oil control valve assembly.

    2. A005JQWE03

      First tighten bolt A, then tighten bolt B.

      Torque:
      19 N*m  { 189 kgf*cm, 14 ft.*lbf }
      for bolt A
      54 N*m  { 551 kgf*cm, 40 ft.*lbf }
      for bolt B

  3. INSPECT FOR FAN AND GENERATOR V BELT

    Click here

  4. INSTALL ENGINE UNDER COVER RH

    Click here