REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE NO. 1 CRANKSHAFT POSITION SENSOR PLATE

    Click here

  2. REMOVE ENGINE REAR OIL SEAL


    1. Using a knife, cut off the oil seal lip.

    2. A005IQCE01
      Text in Illustration
      *1 Protective Tape
      *a Cut Position

      Using a screwdriver with its tip wrapped in protective tape, remove the engine rear oil seal.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.