FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to a new oil seal lip.

    2. A005JILE04

      Using SST and a hammer, tap in the new oil seal until its surface is flush with the timing chain cover edge.

      SST
      09223-22010

      Note


      • Keep the lip free from foreign matter.

      • Do not tap the oil seal at an angle.

  2. INSTALL CRANKSHAFT DAMPER SUB-ASSEMBLY


    1. Align the key with the key groove of the crankshaft damper, and slide the crankshaft damper to the crankshaft.

    2. A005J6OE05
      Text in Illustration
      *a Hold
      *b Turn

      Using SST, secure the crankshaft damper.

      SST
      09213-58014
      09330-00021

    3. Tighten the bolt to the specified torque.

      Torque:
      210 N*m  { 2141 kgf*cm, 155 ft.*lbf }

  3. INSTALL ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH

    A005MC5E02

    1. Temporarily tighten the engine mounting insulator RH with the 4 bolts and 3 nuts.

    2. Fully tighten the 3 bolts to the body, in the order shown in the illustration.

      Torque:
      Bolt A
      45 N*m  { 459 kgf*cm, 33 ft.*lbf }

    3. Fully tighten the bolt and 3 nuts to the engine.

      Torque:
      Bolt B
      88 N*m  { 897 kgf*cm, 65 ft.*lbf }
      Nut C
      52 N*m  { 530 kgf*cm, 38 ft.*lbf }
      Nut D
      88 N*m  { 897 kgf*cm, 65 ft.*lbf }

    4. Install the engine mounting stay with the 2 bolts.

      Torque:
      88 N*m  { 897 kgf*cm, 65 ft.*lbf }

    5. Install the relay block bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  4. INSTALL FAN AND GENERATOR V BELT

    Click here

  5. INSPECT FAN AND GENERATOR V BELT

    Click here

  6. INSTALL RADIATOR RESERVE TANK BRACKET

    Click here

  7. INSTALL RADIATOR RESERVE TANK ASSEMBLY

    Click here

  8. CONNECT UNION TO CONNECTOR TUBE HOSE

    Click here

  9. INSPECT FOR OIL LEAK

  10. INSTALL NO. 1 ENGINE COVER

    Click here

  11. INSTALL OIL PAN COVER

    Click here

  12. INSTALL ENGINE UNDER COVER RH

    Click here

  13. INSTALL CENTER ENGINE UNDER COVER

    Click here

  14. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }