FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE ENGINE UNDER COVER RH

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  5. REMOVE FAN AND GENERATOR V BELT

    Click here

  6. REMOVE CRANKSHAFT PULLEY ASSEMBLY


    1. A005GMWE09
      Text in Illustration
      *a Hold
      *b Loosen

      Using SST, remove the crankshaft pulley bolt.

      SST
      09960-10010   ( 09962-01000, 09963-01000 )

    2. Remove the crankshaft pulley from the crankshaft.

  7. REMOVE TIMING CHAIN COVER OIL SEAL


    1. A005ICYE05
      Text in Illustration
      *1 Protective Tape
      *a Cut Position
      *b Pry Out

      Using a knife, cut off the oil seal lip.

    2. Using a screwdriver with its tip wrapped with protective tape, pry out the oil seal.

      Note

      After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.