AIR FUEL RATIO SENSOR REMOVAL

PROCEDURE

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK

   Click here

2. REMOVE FRONT NO. 1 VENTILATOR SEAL

   Click here

3. REMOVE FRONT AIR SHUTTER SEAL RH

   Click here

4. REMOVE COWL TOP INSIDE CORNER PANEL RH

   Click here

5. REMOVE INNER LOWER COWL TOP REINFORCEMENT

   Click here

6. REMOVE INNER COWL TOP TO COWL BRACE

   Click here

7. REMOVE OUTER COWL TOP PANEL

   Click here

8. REMOVE AIR FUEL RATIO SENSOR

   
   

   1. 

      Disconnect the air fuel ratio sensor connector.

   2. Separate the wire harness from the wire harness bracket.

   3. 

      Using SST, remove the air fuel ratio sensor.

      SST

      09224-00010

      Note

      Do not damage the air fuel ratio sensor.