CRANKSHAFT POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT CRANKSHAFT POSITION SENSOR

    A005GZRE03
    Text in Illustration
    *a

    Component without harness connected

    (Crankshaft Position Sensor)

    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      1 - 2 Cold 985 to 1600 Ω
      1 - 2 Hot 1265 to 1890 Ω

      Tech Tips

      In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50 °C (14 to 122 °F). Hot means approximately 50 to 100 °C (122 to 212 °F).

      If the resistance is not as specified, replace the crankshaft position sensor.