CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

   
   

   1. Apply a light coat of engine oil to the O-ring.

   2. Install the crankshaft position sensor with the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      Do not twist the O-ring.

   3. Connect the crankshaft position sensor connector.

2. INSPECT FOR ENGINE OIL LEAK

3. INSTALL ENGINE UNDER COVER RH

   Click here