CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR

   
   
   1. 

      Text in Illustration

      *1

      O-ring

      Apply a light coat of engine oil to the O-ring.

   2. Install the camshaft position sensor with the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      
      

      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

   3. Connect the camshaft position sensor connector.

2. INSPECT FOR ENGINE OIL LEAK