CAMSHAFT POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT CAMSHAFT POSITION SENSOR

    A005LAHE15
    Text in Illustration
    *a

    Component without harness connected

    (Camshaft Position Sensor)

    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Resistance
      1 - 2 20°C (68°F) 1850 to 2450 Ω

      Tech Tips

      In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50 °C (14 to 122 °F). Hot means approximately 50 to 100 °C (122 to 212 °F).

      If the resistance is not as specified, replace the camshaft position sensor.