THROTTLE BODY REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A005HGR

      Disengage the clamp and disconnect the fuel vapor feed hose assembly from the No. 1 air cleaner hose.

    2. Loosen the 2 hose clamps and disconnect the fuel vapor feed hose assembly from the No. 1 air cleaner hose and vacuum switching valve assembly.

    3. A005ITH

      Disconnect the No. 2 fuel vapor feed hose from the intake manifold.

    4. A005LU2

      Disengage the 2 clamps and disconnect the wire harness from the air cleaner cap sub-assembly and vacuum switching valve assembly.

    5. Disconnect the mass air flow meter connector.

    6. Disconnect the vacuum switching valve connector.

    7. A005KUP

      Loosen the hose clamp and disconnect the No. 1 air cleaner hose from the throttle body assembly.

    8. Disengage the 2 clamps and remove the air cleaner cap sub-assembly with No. 1 air cleaner hose.

  3. REMOVE THROTTLE BODY ASSEMBLY


    1. A005KID

      Remove the 2 nuts and separate the water filler bracket from the throttle body assembly.

    2. A005HJ9

      Loosen the hose clamp and disconnect the No. 2 water by-pass hose from the throttle body assembly.

    3. A005ME6

      Loosen the hose clamp and disconnect the water by-pass hose from the throttle body assembly.

    4. A005K2J

      Disconnect the throttle body assembly connector.

    5. Disengage the wire harness clamp and separate the wire harness from the wire harness bracket.

    6. A005IH4

      Remove the nut and wire harness bracket.

    7. A005IEE

      Remove the bolt, 3 nuts and throttle body assembly.

    8. Remove the gasket from the intake manifold.