SFI SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips

*: Use the intelligent tester.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT

    NEXT

  3. CONNECT INTELLIGENT TESTER TO DLC3*

    Tech Tips

    If the display indicates a communication fault in the tester, inspect the DLC3.

    When any CAN communication system DTCs are output, perform troubleshooting on the CAN communication system first.

    Result
    Proceed to
    NEXT

    NEXT

  4. CHECK DTC AND FREEZE FRAME DATA*

    Tech Tips

    Record or print DTCs and freeze frame data, if necessary.


    Result
    Proceed to
    NEXT

    NEXT

  5. CLEAR DTC AND FREEZE FRAME DATA*

    Tech Tips

    Clear the DTC.

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  6. CONDUCT VISUAL INSPECTION

    Result
    Proceed to
    NEXT

    NEXT

  7. SELECT CHECK MODE DIAGNOSIS*


    1. Refer to "Check Mode Procedure".

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  8. CONFIRM PROBLEM SYMPTOMS


    1. Refer to "Problem Symptoms Table".

      Click here

      Tech Tips

      If the engine does not start, first perform the "Check DTC" procedures and "Conduct Basic Inspection" procedures below.

      Result
      Result Proceed to
      Malfunction does not occur A
      Malfunction occurs B

    B

    GO TO STEP 10 Click here

    A

  9. SIMULATE SYMPTOMS

    Result
    Proceed to
    NEXT

    NEXT

  10. CHECK DTC*


    1. Check DTC.

      Click here

      Result
      Result Proceed to
      DTC is output A
      DTC is not output B

    B

    CONDUCT BASIC INSPECTION Click here

    A

  11. REFER TO DTC CHART

    Tech Tips

    Refer to "Diagnostic Trouble Code Chart".

    Click here

    Result
    Proceed to
    NEXT

    NEXT

    GO TO STEP 14 Click here

  12. CONDUCT BASIC INSPECTION


    1. Refer to "Basic Inspection".

      Click here

      Result
      Result Proceed to
      Malfunctioning parts not confirmed A
      Malfunctioning parts confirmed B

    B

    GO TO STEP 17 Click here

    A

  13. REFER TO PROBLEM SYMPTOMS TABLE


    1. Refer to "Problem Symptoms Table".

      Click here

      Result
      Result Proceed to
      Malfunctioning circuit confirmed A
      Malfunctioning parts confirmed B

    B

    CONDUCT PARTS INSPECTION Click here

    A

  14. CHECK ECM POWER SOURCE CIRCUIT

    Tech Tips

    Refer to "ECM Power Source Circuit".

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  15. CONDUCT CIRCUIT INSPECTION

    Result
    Result Proceed to
    Malfunction not confirmed A
    Malfunction confirmed B

    B

    GO TO STEP 18 Click here

    A

  16. CHECK FOR INTERMITTENT PROBLEMS


    1. Refer to "Check for Intermittent Problems".

      Click here

      Result
      Proceed to
      NEXT

    NEXT

    GO TO STEP 18 Click here

  17. CONDUCT PARTS INSPECTION

    Result
    Proceed to
    NEXT

    NEXT

  18. IDENTIFY PROBLEM

    Result
    Proceed to
    NEXT

    NEXT

  19. ADJUST AND/OR REPAIR

    Result
    Proceed to
    NEXT

    NEXT

  20. CONDUCT CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT

    END