CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. A005GHJ

      Apply a light coat of engine oil to the O-ring.

    2. Install the camshaft position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked and does not jump out of position during installation.

    3. Connect the camshaft position sensor connector.

  2. INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)


    1. A005GHJ

      Apply a light coat of engine oil to the O-ring.

    2. Install the camshaft position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked and does not jump out of position during installation.

    3. Connect the camshaft position sensor connector.

  3. INSPECT FOR ENGINE OIL LEAK

  4. INSTALL NO. 1 ENGINE COVER

    Click here