AIR FUEL RATIO SENSOR INSTALLATION

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A005LH8E01
      Text in Illustration
      *a Fulcrum Length

      Using SST, install the air fuel ratio sensor.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 33 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).

      • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) Click here.

      • This torque value is effective when SST is parallel to the torque wrench.

    2. Install the air fuel ratio sensor wire harness to the air fuel ratio sensor bracket.

    3. Engage the wire harness clamp.

    4. Connect the air fuel ratio sensor connector.

  2. INSTALL NO. 1 TURBO INSULATOR

    Click here

  3. INSTALL NO. 2 ENGINE COVER BRACKET

    Click here

  4. INSTALL OUTER COWL TOP PANEL

    Click here

  5. INSTALL INNER COWL TOP REINFORCEMENT

    Click here

  6. INSTALL COWL TOP INSIDE CORNER PANEL LH

    Click here

  7. INSTALL INNER COWL TOP TO COWL BRACE

    Click here

  8. INSTALL FRONT AIR SHUTTER SEAL RH

    Click here

  9. INSTALL FRONT NO. 1 VENTILATOR SEAL

    Click here

  10. INSTALL FRONT WIPER MOTOR AND LINK

    Click here

  11. INSTALL NO. 1 ENGINE COVER

    Click here

  12. INSPECT FOR EXHAUST GAS LEAK