AIR FUEL RATIO SENSOR REMOVAL

PROCEDURE

1. REMOVE NO. 1 ENGINE COVER

   Click here

2. REMOVE FRONT WIPER MOTOR AND LINK

   Click here

3. REMOVE FRONT NO. 1 VENTILATOR SEAL

   Click here

4. REMOVE FRONT AIR SHUTTER SEAL RH

   Click here

5. REMOVE INNER COWL TOP TO COWL BRACE

   Click here

6. REMOVE COWL TOP INSIDE CORNER PANEL LH

   Click here

7. REMOVE INNER COWL TOP REINFORCEMENT

   Click here

8. REMOVE OUTER COWL TOP PANEL

   Click here

9. REMOVE NO. 2 ENGINE COVER BRACKET

   Click here

10. REMOVE NO. 1 TURBO INSULATOR

    Click here

11. REMOVE AIR FUEL RATIO SENSOR

    

    
    

    1. Disconnect the air fuel ratio sensor connector.

    2. Disengage the wire harness clamp.

    3. Separate the air fuel ratio sensor wire harness from the air fuel ratio sensor bracket.

    4. 

       Using SST, remove the air fuel ratio sensor.

       SST

       09224-00010

       Note

       Do not damage the air fuel ratio sensor.