ECM INSTALLATION

PROCEDURE


  1. INSTALL ECM


    1. Install the ECM with the bolt and 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Install the water pipe with the 2 nuts. (w/ Combustion Type Power Heater)

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Install the brake booster vacuum pipe with the 2 bolts. (w/ Combustion Type Power Heater)

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }
    4. A005H0W

      Connect the 2 ECM connectors.

    5. Lock the 2 lock knobs.

  2. INSTALL OUTER COWL TOP PANEL

    Click here

  3. INSTALL INNER COWL TOP REINFORCEMENT

    Click here

  4. INSTALL COWL TOP INSIDE CORNER PANEL LH

    Click here

  5. INSTALL INNER COWL TOP TO COWL BRACE

    Click here

  6. INSTALL FRONT AIR SHUTTER SEAL RH

    Click here

  7. INSTALL FRONT NO. 1 VENTILATOR SEAL

    Click here

  8. INSTALL FRONT WIPER MOTOR AND LINK

    Click here

  9. INSTALL NO. 1 ENGINE COVER

    Click here