ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket onto the engine coolant temperature sensor.

   2. Using SST, install the engine coolant temperature sensor.

      SST

      09817-33190

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

   3. Connect the engine coolant temperature sensor connector.

2. INSTALL WIRING HARNESS CLAMP BRACKET

   
   

   1. Install the wiring harness bracket with the bolt.

      Torque:

      5.3 N*m  { 54 kgf*cm, 47 in.*lbf }

   2. Engage the wire harness clamp.

3. INSTALL BATTERY TRAY

   Click here

4. INSTALL BATTERY

   Click here

5. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

6. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   Click here

7. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

9. ADD ENGINE COOLANT

   Click here

10. INSPECT FOR ENGINE COOLANT LEAK

    Click here

11. INSPECT SRS WARNING LIGHT

    Click here