ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Click here

  3. DRAIN ENGINE COOLANT

    Click here

  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  7. REMOVE BATTERY

    Click here

  8. REMOVE BATTERY TRAY

    Click here

  9. REMOVE WIRING HARNESS CLAMP BRACKET


    1. A005H71

      Remove the bolt and disengage the harness clamp and remove the wiring harness clamp bracket.

  10. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A005ITKE03

      Disconnect the engine coolant temperature sensor connector.

    2. Using SST, remove the engine coolant temperature sensor and gasket.

      SST
      09817-33190