CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

   
   

   1. Install the crankshaft position sensor with the 2 bolts.

      Torque:

      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

   2. Engage the crankshaft position sensor wire harness clamp to the wire harness bracket.

   3. Connect the crankshaft position sensor connector.

2. INSTALL CYLINDER BLOCK SIDE COVER

   Click here

3. INSTALL MANIFOLD SUPPORT BRACKET

   Click here

4. INSTALL MANIFOLD STAY

   
   

   1. Install the manifold stay with 2 bolts.

      Torque:

      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

5. INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

   Click here

6. INSPECT FOR ENGINE OIL LEAK