CRANKSHAFT POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT CRANKSHAFT POSITION SENSOR


    1. A005KLBE10
      Text in Illustration
      *a

      Component without harness connected

      (Crank Position Sensor)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (NE+) - 2 (NE-) 20°C (68°F) 1850 to 2450 Ω

        If the result is not as specified, replace the crankshaft position sensor.