CRANKSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

    Click here

  2. REMOVE MANIFOLD STAY


    1. A005IYO

      Remove the 2 bolts and the manifold stay.

  3. REMOVE MANIFOLD SUPPORT BRACKET

    Click here

  4. REMOVE CYLINDER BLOCK SIDE COVER

    Click here

  5. REMOVE CRANKSHAFT POSITION SENSOR


    1. A005GTB

      Disconnect the crankshaft position sensor connector.

    2. Disengage the crankshaft position sensor connector wire harness clamp from the wire harness bracket.

    3. Remove the 2 bolts and the crankshaft position sensor.