CAMSHAFT POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT CAMSHAFT POSITION SENSOR

    A005KLBE10
    Text in Illustration
    *a

    Component without harness connected

    (Camshaft Position Sensor)

    1. Check the resistance.


      1. Disconnect the camshaft position sensor connector.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 950 to 1250 Ω

        If the result is not as specified, replace the crankshaft position sensor.