BRAKE GENERAL MAINTENANCE

PROCEDURE


  1. INSPECT BRAKE LINE PIPES AND HOSES

    Tech Tips

    Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


    1. A005L1C

      Using a mirror, check the entire circumference and length of the brake lines and hoses for:


      • Damage

      • Wear

      • Deformation

      • Cracks

      • Corrosion

      • Leaks

      • Bends

      • Twists

    2. Check all the clamps for tightness and the connections for leakage.

    3. Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.

    4. Check that the lines are installed properly and pass through the center of the grommets.

  2. INSPECT BRAKE PEDAL

    Check the brake pedal (See page for LHD, Click here for RHD).

  3. INSPECT PARKING BRAKE

    Click here

  4. INSPECT BRAKE LININGS AND DISCS


    1. Check the brake linings and drums. Also check the brake linings of parking brake.

  5. INSPECT FRONT BRAKE


    1. Check the front brake pads and discs Click here.

  6. INSPECT REAR BRAKE


    1. Check the rear brake pads, discs, linings and drums.

      Type See Procedure
      Disc Type

      Click here

      Drum Type

      Click here

  7. INSPECT OR CHARGE BRAKE FLUID

    Click here

    Fluid
    SAE J1703 or FMVSS No. 116 DOT3