| Diesel throttle body assembly | Resistance | Standard | 1 (M-) - 2 (M+) | 0.3 to 100 Ω at 20°C (68°F) |
| Mass air flow meter | Resistance | Standard | 4 (THA) - 5 (E2) | 12.5 to 16.9 kΩ at -20° (-4°F) 2.19 to 2.67 kΩ at 20° (68°F) 0.50 to 0.68 kΩ at 60° (140°F) |
| Camshaft position sensor | Resistance | Standard | 1 - 2 | 950 to 1250 Ω at 20° (68°F) |
| Crankshaft position sensor | Resistance | Standard | 1 (NE+) - 2 (NE-) | 1850 to 2450 Ω at 20° (68°F) |
| Engine coolant temperature sensor | Resistance | Standard | 1 (E2) - 2 (THW) | 2.28 to 2.63 kΩ at 20° (68°F) |
| 0.305 to 0.331 kΩ at 80° (176°F) | ||||
| Intake air temperature sensor | Resistance | Standard | 1 - 2 | 2.21 to 2.65 kΩ(Approximately 20° (68°F)) 0.55 to 0.61 kΩ(Approximately 60° (140°F)) |
| Diesel turbo turbo pressure sensor (Front of wire harness connector) | Resistance | Standard | 3 (VC) - 1 (E2) | 4.5 to 5.5 V (Ignition switch on (IG)) |
| Air fuel ratio sensor | Resistance | Standard | 5 (H-) - 2 (+B) | 2 to 5 Ω at 20° (68°F) |
| 5 (H-) - 4 (AF1+) | 10KΩ or higher | |||
| Integration relay | Resistance | Standard | 1C-1 - 1E-4 | 10KΩ or higher (Battery voltage is not applied to terminals 1E- 10 and 1D-7) |
| Below 1Ω (Battery voltage is applied to terminals 1E- 10 and 1D-7) |
||||
| 1E-4 - 1E-5 | 10KΩ or higher (Battery voltage is not applied to terminals 1E- 11 and 1D-9) |
|||
| Below 1Ω (Battery voltage is applied to terminals 1E- 11 and 1D-9) |
||||
| 1C-1 - 1E-2 | 10KΩ or higher (Battery voltage is not applied to terminals 1E- 10 and 1D-17) |
|||
| Below 1Ω (Battery voltage is applied to terminals 1E- 10 and 1D-17) |
||||
| 1C-1 - 1E-7 | 10KΩ or higher (Battery voltage is not applied to terminals 1C- 1 and 1D-18) |
|||
| Below 1Ω (Battery voltage is applied to terminals 1C- 1 and 1D-18) |