BLACK OUT TAPE(for Rear Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When removing the black out tape, heat the vehicle body surface and black out tape using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Black Out Tape 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body or black out tape excessively.

PROCEDURE


  1. REMOVE REAR DOOR UPPER ARMREST BASE PANEL

    Click here

  2. REMOVE REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

    Click here

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  4. REMOVE REAR DOOR SERVICE HOLE COVER

    Click here

  5. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY

    Click here

  6. REMOVE REAR DOOR REAR GUIDE SEAL

    Click here

  7. REMOVE REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  8. REMOVE REAR DOOR GLASS RUN

    Click here

  9. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

    Click here

  10. REMOVE REAR DOOR WEATHERSTRIP

    Click here

  11. REMOVE REAR DOOR WINDOW FRAME FRONT MOULDING

    Click here

  12. REMOVE NO. 4 BLACK OUT TAPE


    1. Heat the vehicle body surface and the No. 4 black out tape using a heat light.

    2. A005JJK

      Pull back an edge of the No. 4 black out tape and pull it parallel to the vehicle body to remove it.

  13. REMOVE NO. 3 BLACK OUT TAPE


    1. Heat the vehicle body surface and the No. 3 black out tape using a heat light.

    2. A005LBW

      Pull back an edge of the No. 3 black out tape and pull it parallel to the vehicle body to remove it.