REAR DOOR BELT MOULDING INSTALLATION

PROCEDURE

1. INSTALL REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

   
   

   1. 

      Engage the 5 claws and 2 clips and install a new rear door glass outer weatherstrip assembly.

   2. Remove the protective tape.

2. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

   Click here

3. INSTALL REAR DOOR REAR GUIDE SEAL

   Click here

4. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY

   Click here

5. INSTALL REAR DOOR SERVICE HOLE COVER

   Click here

6. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

7. INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

   Click here

8. INSTALL REAR DOOR UPPER ARMREST BASE PANEL

   Click here