FRONT BUMPER INSTALLATION

PROCEDURE

1. INSTALL FRONT BUMPER COVER

   
   

   1. Connect the front fog light connector.

   2. Engage the 8 claws and install the front bumper cover.

   3. 

      Install the pin hold clip.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

      Tech Tips

      Use the same procedure for the RH side and LH side.

      Text in illustration

      *1	Pin hold clip
      *a	CORRECT
      *b	INCORRECT

   4. Install the 2 screws.

   5. Install the 4 clips.

   6. Install the 8 screws.

2. INSTALL ENGINE UNDER COVER RH

   Click here

3. INSTALL ENGINE UNDER COVER LH

   Click here

4. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT (w/ Front Fog Light)

   Click here

5. PREPARE FOG LIGHT AIMING (w/ Front Fog Light)

   Click here

6. INSPECT FOG LIGHT AIMING (w/ Front Fog Light)

   Click here

7. ADJUST FOG LIGHT AIMING (w/ Front Fog Light)

   Click here