FRONT BUMPER REMOVAL

PROCEDURE


  1. REMOVE ENGINE UNDER COVER RH

    Click here

  2. REMOVE ENGINE UNDER COVER LH

    Click here

  3. REMOVE FRONT BUMPER COVER

    A005JJ9E01

    1. Apply protective tape, as shown in the illustration.

      Text in illustration
      *1 Protective Tape
    2. A005HEP

      Remove the 8 screws.

    3. A005GTF

      Using a clip remover, remove the 4 clips.

    4. A005LU4E01

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

      Text in illustration
      *1 Pin hold clip
    6. A005L9L

      Disengage the 4 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. Disconnect the each connector and remove the front bumper cover.