HEADLIGHT LEVELING ECU INSTALLATION

PROCEDURE

1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY

   
   

   1. Install the headlight leveling ECU sub-assembly with the screw.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the connector.

2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

3. HEADLIGHT LEVELING ECU INITIALIZATION

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

5. INSPECT SRS WARNING LIGHT

   Click here