AUTOMATIC LIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

   

   
   

   1. Engage the 2 claws to install the automatic light control sensor.

   2. Connect the connector.

2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSPECT SRS WARNING LIGHT

   Click here