STOP LIGHT SWITCH INSPECTION

PROCEDURE


  1. INSPECT STOP LIGHT SWITCH ASSEMBLY (for Bulb Type Stop Light)

    A005LYZE05
    Text in Illustration
    *1 Stop light
    *2 Cruise cancel
    *a

    Component without harness connected

    (Stop Light Switch Assembly)
    *b Pushed

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Not pushed Below 1 Ω
      Pushed 10 kΩ or higher
      3 - 4 Not pushed 10 kΩ or higher
      Pushed Below 200 Ω

      If the result is not as specified, replace the stop light switch assembly.

  2. INSPECT STOP LIGHT SWITCH ASSEMBLY (for LED Type Stop Light)

    A005IJ6E13
    Text in Illustration
    *1 Stop light
    *2 Cruise cancel
    *a

    Component without harness connected

    (Stop Light Switch Assembly)
    *b Pushed

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Not pushed Below 1 Ω
      Pushed 10 kΩ or higher
      3 - 4 Not pushed 10 kΩ or higher
      Pushed Below 200 Ω

      If the result is not as specified, replace the stop light switch.