REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

    A005HIS

    1. Engage the pin as shown in the illustration and install the rear combination light assembly.

    2. Connect the connector.

    3. Install the 2 bolts.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  3. INSTALL RECLINING REMOTE CONTROL BEZEL LH

    Click here

  4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  5. INSTALL DECK SIDE TRIM BOX LH (w/o Rear Deck Floor Box)

    Click here

  6. INSTALL LUGGAGE ROOM BOX SEPARATOR

    Click here

  7. INSTALL REAR FLOOR REAR MAT (w/o Rear Deck Floor Box)

    Click here

  8. INSTALL REAR DECK TRIM COVER

    Click here

  9. INSTALL BACK DOOR WEATHERSTRIP

    Click here

  10. INSTALL REAR DECK FLOOR BOX (w/ Rear Deck Floor Box)

    Click here

  11. INSTALL DECK BOARD ASSEMBLY

    Click here

  12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  13. INSTALL REAR DOOR SCUFF PLATE LH

    Click here